Articles Tagged: guide

Waste Ink Fix for Canon G4511 Megatank

The Canon G4000 series include waste ink pads more prone to fill up with waste ink, particularly when there have been clogging issues or priming problems. The G4 printer Potty kit provides the necessary reset key to clear the waste ink counter along with the physical waste kit to redirect the waste ink out of […]

Read More →

Waste Ink Pads/Kit Installation Guides for XP-510

The XP-510 is a specific printer design which Epson decided to hamstring with 50% capacity waste ink pads despite the printer being able to accept the full size pads that fit other XP500 to XP860 models. As such our Printer Pad kits provide the full pad capacity available to the printer and allow end-users to […]

Read More →

Installation: ET-2600, ET-2650, etc..

We have two different guides for this series of printers so please choose the correct one below: Printer Potty (external waste ink kit) Installation Printer Pads (internal waste ink pad) Replacement Instructions. Printer Potty :: External Waste ink kit installation This video guide shows the process for installing an LX2 Printer Potty kit on the ET-2600 and L2650 series […]

Read More →

Waste Ink Counter: What is it?

What is a “Waste Ink Counter” A waste ink counter resides in the printers firmware (non-volatile memory) and consists of an ambiguous value that the printer will increment over time with each operation that generates waste ink. What causes a waste ink related error? Each printer will have a pre-determined limit or trigger value that […]

Read More →

Installation: Canon G2500

This video covers the installation and reset process for the Canon Megatank G-2500 printer. The Printer Potty installation process is very similar for other G series printers while the reset process may differ, particularly for earlier models that could be reset using the printers own control panel/buttons to complete the task. Printer Potty Kit: Solo-G2 […]

Read More →

Installation RX620 / RX630

Another older printer, the RX620 has been re-documented to provide a much improved and clearer guide to installing a Printer Potty on this and related models (eg: RX500, RX510) This printer uses the Solo+ waste ink kit. Installation Process

Read More →

Waste Ink Kit Installation: Epson PX730WD

Printer Potty installation guide for the Epson Stylus Photo PX730WD using the Duo-X waste ink kit. Note: The Duo-X Printer Potty kit is an updated version of the Solo-X and takes care of a secondary waste ink tube that acts as an overflow. Installation Process Note: If you have received a kit with two identical […]

Read More →