Installation: ET-2750, L4150 – L4170

We have two different guides for this series of printers so please choose the correct one below: Printer Potty (external waste ink kit) Installation Printer Pads (internal waste ink pad) Replacement Instructions. Printer Potty :: External Waste ink kit installation This video guide shows the process for installing an LX2 Printer Potty kit on the […]

Read More

WICReset: USB vs’ WIFI Connection

Because the WICReset utility now supports connection and reset functionality over WIFI, we are frequently asked “Why do we still recommend using a USB cable connection to reset and not WIFI?” The reason we strongly recommend a USB connection for the waste counter reset is that the reset process writes a value to the printers […]

Read More

Installation: SX435W

Installation guide for Printer Potty in SX435W model printer Also covers a huge number of other models compatible with the Solo-LX Printer Potty kit.  

Read More

Printer Pad replacement (XP4)

The XP4 Printer Pad set is supported by our video installation guide for the XP-950, 900 and 960 Epson inkjet printers which covers How to replace the waste ink pads in porous pad assembly (pad holders) How to remove and replace the pad holder from/into the printer … and tips for avoiding ink spills and […]

Read More

Printer Pad replacement (LX1)

The LX1 Printer Pad set covers two different types of printer design so we’ve created two video installation guides which covers: How to replace the waste ink pads in one of the following porous pad assemblies (pad holders) Special circumstances when installing on a CIS equipped printer Alternative approaches on removing and replacing the pad […]

Read More

Installation: CX3200

The Epson CX3200 is surprisingly like the R300 with a minor change in the way the trapdoor is mounted. Instead of the screw securing it being to the bottom of the trap door, it’s located perpendicular and at the top of the trap door. Not exactly rocket science. Inside things are a little different as […]

Read More

Installation: Epson 1290

This modification is equally applicable to the Epson Stylus Photo 1280 There has been a reasonably useful guide for modifying this printer on InkRepublic but unfortunately it was a bit too easy to try to identify and remove the wrong waste tube end. As the original images belong to Ink Republic you will still need […]

Read More

Epson Artisan 1430 / Photo 1500W [Archive]

With the introduction of the Solo Max waste kit, this guide has been updated to version 2.0 and is also hosted on the Printer Potty site. Photo 1500W/Artisan 1430 installation guide (version 2.0) Note: The original guide (below) includes a couple of variations that are no longer documented in the new guide so it is […]

Read More

Installation: R3000, P600

The original instructions (below) have now been revised and reworked with new images of the whole process step-by-step. The new instructions are provided in a printed 12 page manual which is now included with all new Duo-Max Printer Potty kits. Duo-Max Kit+Key Bundle Duo-Max Kit only The original guide (below) has been left for those […]

Read More