The XP-900, XP-950 and XP-960 printers are supported by our Printer Potty (external waste ink kit) and Printer Pad products with instructions on how to install each provided in the guides linked below. XP4 Printer Pad Instructions XP4 Printer Potty (external waste ink kit) installation instructions Printer Pads (XP4) The XP4 Printer Pad set is […]
Articles Tagged: instruction
Printer Pad replacement (LX1)
The LX1 Printer Pad set covers two different types of printer design so we’ve created two video installation guides which covers: How to replace the waste ink pads in one of the following porous pad assemblies (pad holders) Special circumstances when installing on a CIS equipped printer Alternative approaches on removing and replacing the pad […]
Installation: CX3200
The Epson CX3200 is surprisingly like the R300 with a minor change in the way the trapdoor is mounted. Instead of the screw securing it being to the bottom of the trap door, it’s located perpendicular and at the top of the trap door. Not exactly rocket science. Inside things are a little different as […]
Installation: Epson 1290
This modification is equally applicable to the Epson Stylus Photo 1280 There has been a reasonably useful guide for modifying this printer on InkRepublic but unfortunately it was a bit too easy to try to identify and remove the wrong waste tube end. As the original images belong to Ink Republic you will still need […]
Epson Artisan 1430 / Photo 1500W [Archive]
With the introduction of the Solo Max waste kit, this guide has been updated to version 2.0 and is also hosted on the Printer Potty site. Photo 1500W/Artisan 1430 installation guide (version 2.0) Note: The original guide (below) includes a couple of variations that are no longer documented in the new guide so it is […]
Installation: R3000, P600
The original instructions (below) have now been revised and reworked with new images of the whole process step-by-step. The new instructions are provided in a printed 12 page manual which is now included with all new Duo-Max Printer Potty kits. Duo-Max Kit+Key Bundle Duo-Max Kit only The original guide (below) has been left for those […]
Installation: B1100, T1100, Workforce 1100
Note: This guide also covers the following Epson printer models: T1100 Workforce 1100 This guide also uses a number of images derived from the R1900 guide as the printer case/structure is identical to the B1100. The original guide (see below) has since been replaced by our video guide: OK… here are the step by […]
Installation: Epson SX215, SX100, SX200, SX400 and others.
Note: This guide also covers a wide range of SX,TX,NX and other Epson printer models including: SX100 SX200 SX400 SX215 CX9300F / CX9400F … and many more… These models preceded the design change in later models where a removeable and replaceable porous pad assembly was available as a means of replacing the waste pads. This […]
Installation: R1900, R2000, R2880 [Archive]
This guide has been replaced by the printed instruction booklet produced for the Duo-15 Printer Potty kits. While this guide is still useful it is not as high a standard or as clear as the new version. Note: This guide also covers the following Epson printer models: R1900 R2880 R2000 … and some aspects of […]
Installation: BX525WD, B42WD, TX525WD and more
We’re now able to offer a video guide of the process via YouTube: An older slideshow of the process is also available below: Note: This guide also covers the following Epson printer models: BX525WD SX525WD TX525WD B42WD T42WD This guide is primarily aimed at OctoInkjet customers who have purchased a Solo-X10 waste kit (Release […]