You may have been issued with a key that is no longer being accepted. In most cases this is because you’ve used the key some time ago and don’t remember doing so. To check, please use the “Check Key” functionality in WICReset/iWIC to retrieve the record for your key. However, if you have received […]
All posts by Martin
Installation instructions added for RX620, RX630, RX500
Following on from the earlier R200, R220 updated guide we’ve re-shot and re-documented the Printer Potty waste ink kit installation process for the RX620 (and related printers). The new guide is now available online. Solo+ Waste Kit | RX620 installation instructions
Installation RX620 / RX630
Another older printer, the RX620 has been re-documented to provide a much improved and clearer guide to installing a Printer Potty on this and related models (eg: RX500, RX510) This printer uses the Solo+ waste ink kit. Installation Process
USB connection required
A direct USB connection (between printer and computer with reset utility) is required to complete a waste counter reset. The reason for this is that the waste ink counter resides in the printer firmware and as such a stable connection is required. Network connections, particularly wireless, can be interrupted at a critical juncture and any […]
Update install instructions for Photo 1500, Artisan 1430
Installation instructions for the Epson Stylus Photo 1500W (and Artisan 1430) have been updated and transferred to the Printer Potty Support site. This comes in tandem with a newly released waste kit, the Solo Max which provides an extended tube length of 75cm total making it easy to install with without needing to drill any […]
Installation: Epson Photo 1500W, Artisan 1430
Printer Potty installation guide for the Epson Stylus Photo 1500W and Artisan 1430 using the SoloMax waste ink kit. Installation Process An earlier version of this guide can be found here
Linux :: Reset Tools
Updated: March 16th 2015 While not all Linux OS distros are covered the WICReset team have released a version for 32 and 64 bit Debian Linux which is available using the following download links: Debian Linux 64-bit Debian Linux 32-bit Unless you are a Linux hacker able to tweak the code on the above, […]
Installation instructions added for R200 / R220
Albeit an old printer we have started the process of re-documenting the installation provides for older printers and some newer ones. The latest set is for the Epson Stylus Photo R200 and R220 models and these are now available here
Installation: R200 / R220
Printer Potty installation guide for the Epson Stylus Photo R200, R220 using the Solo+ waste ink kit. Installation Process
Version 3.70.0070 released (Resolves EEPROM error)
Updates to the WICReset service have resulted in a number of printers failing to reset with the error: Could not write value to printer EEPROM Note: The error appeared whenever a waste ink counter reset was attempted but did not use up the WICReset key so it did not result in any wasted keys. This […]