Installation: Epson 1290

This modification is equally applicable to the Epson Stylus Photo 1280 There has been a reasonably useful guide for modifying this printer on InkRepublic but unfortunately it was a bit too easy to try to identify and remove the wrong waste tube end. As the original images belong to Ink Republic you will still need […]

Read More

Epson Artisan 1430 / Photo 1500W [Archive]

With the introduction of the Solo Max waste kit, this guide has been updated to version 2.0 and is also hosted on the Printer Potty site. Photo 1500W/Artisan 1430 installation guide (version 2.0) Note: The original guide (below) includes a couple of variations that are no longer documented in the new guide so it is […]

Read More

Installation: R3000, P600

The original instructions (below) have now been revised and reworked with new images of the whole process step-by-step. The new instructions are provided in a printed 12 page manual which is now included with all new Duo-Max Printer Potty kits. Duo-Max Kit+Key Bundle Duo-Max Kit only The original guide (below) has been left for those […]

Read More

Installation: B1100, T1100, Workforce 1100

Note: This guide also covers the following Epson printer models: T1100 Workforce 1100 This guide also uses a number of images derived from the R1900 guide as the printer case/structure is identical to the B1100. The original guide (see below) has since been replaced by our video guide:   OK… here are the step by […]

Read More

Installation: Epson SX215, SX100, SX200, SX400 and others.

Note: This guide also covers a wide range of SX,TX,NX and other Epson printer models including: SX100 SX200 SX400 SX215 … and many more…  These models preceded the design change in later models where a removeable and replaceable porous pad assembly was available as a means of replacing the waste pads. This guide is primarily […]

Read More

Installation: R1900, R2000, R2880 [Archive]

This guide has been replaced by the printed instruction booklet produced for the Duo-15 Printer Potty kits. While this guide is still useful it is not as high a standard or as clear as the new version. Note: This guide also covers the following Epson printer models: R1900 R2880 R2000 … and some aspects of […]

Read More

Installation: BX525WD, B42WD, TX525WD and more

Note: This guide also covers the following Epson printer models: BX525WD SX525WD TX525WD B42WD T42WD This guide is primarily aimed at OctoInkjet customers who have purchased a Solo-X10 waste kit (Release pending) although customers with the earlier Solo+ can still apply some of the steps to their kit (but without the extra connector part to […]

Read More

Installation: PX700 [Archive]

This guide has long since been replaced by the newer PX730WD installation guide for Printer Potty. This version has been retained as a reference in case it’s useful. Note: This guide also covers the following Epson printer models: PX700W, PX710W, PX720WD, PX730WD PX800FW, PX810FW, PX820FWD, PX830FWD TX700, TX710W, TX720WD TX800FW, TX810FW, TX820FWD Artisan 700, 710, […]

Read More

Installation: PX660, TX650

Updated: This guide has now been superseded by a new video installation guide for the PX660. The information below is still relevant and useful but obviously we’ve included more information in the video guide. Original Guide As with other printers, the PX650 shares many similar traits and design features with the RX560, R360 and any […]

Read More

Installation: RX560, RX580, RX610 and more

While this guide demonstrates the process for fitting a Printer Potty to the RX560, the case and waste system design is equally applicable to the following models: RX580 RX585 RX590 RX595 RX610 RX640 The model RX560 has been used as a reference for ease, throughout.   Whilst this printer is another “trapdoor” style printer the […]

Read More