Installation: RX500 (Archived)

These instructions have now been updated and are available here: RX500 / RX620 Printer Potty Installation Resetting the waste ink counter (RX500) The RX500 can be reset using a keypad combination on the front of the printer itself. You do not need an adjustment utility although one can be used Hold down the “Clear + […]

Read More

Installation: B40W, NX510, SX510W and similar models

  This guide is equally applicable to the following models: Workforce 40 B40W Office T40W T40W NX510 / NX515 SX510W / SX515W TX515W I’ll use the model number “B40W” throughout, for consistency. The first vital bit of information is that this is a double (2) waste tube printer, so you will need a Duo Waste […]

Read More

Installation: RX640 (archived)

The Epson RX640 is built in the same way as the RX560, RX580, RX585, RX590, RX595 and RX610 models from Epson so this guide will apply equally to those models as well.   Note: A more comprehensive guide for the RX560 is now available and the overall design of the printer is very similar, if […]

Read More

Installation: Epson D120, C110, C120

Note: This printer is physically, exactly the same as the following Epson printer models: C110 C120 D120   The Epson D120 follows on from the earlier C84 to D88 models and their tradition of no trapdoor or access hatch. While this does mean you have to release the top of the printer case to get […]

Read More

Installation: Epson D92

This modification also applies to these Epson models: C79 C90, C91, C92 D78 D92 S20, S21 T10, T11 T20, T21, T23, T26, T27   The case design and general build approach for the D92 has been used in a lot of the new cheaper printers as well so this guide will be useful for a […]

Read More

Installation: RX680, RX685, RX690

This guide is equally applicable to the following models: RX680 RX685 RX690 I’ll use the model number RX685 for ease throughout.   The RX685 is yet another of the “trapdoor” printer types, however it did have a small sting in the tail in terms of the trapdoor design itself so it merits its own modification […]

Read More

Installation: Epson R240, R250

Note: This printer is physically, exactly the same to the Epson Stylus R250   The R240 is one of the “trapdoor” type of printer so really this guide is just a reinforcement of other guides like the R300, R220, etc.. That said the printer design is subtly different enough that locating the waste tube is […]

Read More

Installation: Epson Stylus 900

This guide was submitted by an OctoInkjet customer as a PDF and has been retained in that format. Click the link below to download a copy. Printer Potty installation guide for the Epson Stylus 900

Read More

Installation: Epson Photo 1400, 1390, 1410

This modification covers the Epson Stylus Photo models: 1390 1400 1410 The Epson 1400 printer seems to be incredibly similar to the R2400 and R1800, in terms of case and waste ink design but with one important difference. Instead of utilising two waste tubes this printer has only one. This guide provides greater detail on […]

Read More

Installation: C84 – D88

This modification is equally applicable to to the Epson models: C84, C86, C88, D88 C64, C66, C68, D68 The C86 printer and similar models (there’s a slew of them!) do not have the trapdoor built into their designs so the instructions for fitting a waste ink tube on these printers is more complex and requires […]

Read More