The XP2 Printer Pad set is designed to fit and replace the waste pads in Epson inkjet printers from the XP-500 to the XP-860 and we’ve been working hard to add new resources to help explain how to use and install them. The pad holders themselves are OEM parts ref: 1611102 (XP500 – XP860) 1610132 […]
All posts by Martin
Printer Pad replacement (LX1)
The LX1 Printer Pad set covers two different types of printer design so we’ve created two video installation guides which covers: How to replace the waste ink pads in one of the following porous pad assemblies (pad holders) Special circumstances when installing on a CIS equipped printer Alternative approaches on removing and replacing the pad […]
Installation: CX3200
The Epson CX3200 is surprisingly like the R300 with a minor change in the way the trapdoor is mounted. Instead of the screw securing it being to the bottom of the trap door, it’s located perpendicular and at the top of the trap door. Not exactly rocket science. Inside things are a little different as […]
WICReset: Windows 10/11 S Mode compatibility
Windows 10 and 11 both have a version which is called “S mode”. This is described as: ..a version of Windows 10 that’s streamlined for security and performance, while providing a familiar Windows experience. To increase security, it allows only apps from the Microsoft Store, and requires Microsoft Edge for safe browsing. Ref: https://support.microsoft.com/en-us/windows/windows-10-and-windows-11-in-s-mode… This […]
Installation: Epson 1290
This modification is equally applicable to the Epson Stylus Photo 1280 There has been a reasonably useful guide for modifying this printer on InkRepublic but unfortunately it was a bit too easy to try to identify and remove the wrong waste tube end. As the original images belong to Ink Republic you will still need […]
Epson Artisan 1430 / Photo 1500W [Archive]
With the introduction of the Solo Max waste kit, this guide has been updated to version 2.0 and is also hosted on the Printer Potty site. Photo 1500W/Artisan 1430 installation guide (version 2.0) Note: The original guide (below) includes a couple of variations that are no longer documented in the new guide so it is […]
Epson Error 0x50
Error Message: Cannot seek CR home position This error indicates that the printhead carriage can’t move back into its resting position on the far right* of the printer. Other Indicators: Printhead/Carriage moves freely even after turning printer off/on Printhead does not lock into position on the far right Possible causes include: Paper or some other […]
Installation: R3000, P600
The original instructions (below) have now been revised and reworked with new images of the whole process step-by-step. The new instructions are provided in a printed 12 page manual which is now included with all new Duo-Max Printer Potty kits. Duo-Max Kit+Key Bundle Duo-Max Kit only The original guide (below) has been left for those […]
Installation: B1100, T1100, Workforce 1100
Note: This guide also covers the following Epson printer models: T1100 Workforce 1100 This guide also uses a number of images derived from the R1900 guide as the printer case/structure is identical to the B1100. The original guide (see below) has since been replaced by our video guide: OK… here are the step by […]
Installation: Epson SX215, SX100, SX200, SX400 and others.
Note: This guide also covers a wide range of SX,TX,NX and other Epson printer models including: SX100 SX200 SX400 SX215 CX9300F / CX9400F … and many more… These models preceded the design change in later models where a removeable and replaceable porous pad assembly was available as a means of replacing the waste pads. This […]