Installation: B1100, T1100, Workforce 1100

Note: This guide also covers the following Epson printer models: T1100 Workforce 1100 This guide also uses a number of images derived from the R1900 guide as the printer case/structure is identical to the B1100. The original guide (see below) has since been replaced by our video guide:   OK… here are the step by […]

Read More

Installation: Epson SX215, SX100, SX200, SX400 and others.

Note: This guide also covers a wide range of SX,TX,NX and other Epson printer models including: SX100 SX200 SX400 SX215 … and many more…  These models preceded the design change in later models where a removeable and replaceable porous pad assembly was available as a means of replacing the waste pads. This guide is primarily […]

Read More

Installation: R1900, R2000, R2880 [Archive]

This guide has been replaced by the printed instruction booklet produced for the Duo-15 Printer Potty kits. While this guide is still useful it is not as high a standard or as clear as the new version. Note: This guide also covers the following Epson printer models: R1900 R2880 R2000 … and some aspects of […]

Read More

Installation: BX525WD, B42WD, TX525WD and more

Note: This guide also covers the following Epson printer models: BX525WD SX525WD TX525WD B42WD T42WD This guide is primarily aimed at OctoInkjet customers who have purchased a Solo-X10 waste kit (Release pending) although customers with the earlier Solo+ can still apply some of the steps to their kit (but without the extra connector part to […]

Read More

Installation: PX700 [Archive]

This guide has long since been replaced by the newer PX730WD installation guide for Printer Potty. This version has been retained as a reference in case it’s useful. Note: This guide also covers the following Epson printer models: PX700W, PX710W, PX720WD, PX730WD PX800FW, PX810FW, PX820FWD, PX830FWD TX700, TX710W, TX720WD TX800FW, TX810FW, TX820FWD Artisan 700, 710, […]

Read More

Installation: PX660, TX650

Updated: This guide has now been superseded by a new video installation guide for the PX660. The information below is still relevant and useful but obviously we’ve included more information in the video guide. Original Guide As with other printers, the PX650 shares many similar traits and design features with the RX560, R360 and any […]

Read More

Installation: RX560, RX580, RX610 and more

While this guide demonstrates the process for fitting a Printer Potty to the RX560, the case and waste system design is equally applicable to the following models: RX580 RX585 RX590 RX595 RX610 RX640 The model RX560 has been used as a reference for ease, throughout.   Whilst this printer is another “trapdoor” style printer the […]

Read More

Installation: RX500 (Archived)

These instructions have now been updated and are available here: RX500 / RX620 Printer Potty Installation Resetting the waste ink counter (RX500) The RX500 can be reset using a keypad combination on the front of the printer itself. You do not need an adjustment utility although one can be used Hold down the “Clear + […]

Read More

Installation: B40W, NX510, SX510W and similar models

  This guide is equally applicable to the following models: Workforce 40 B40W Office T40W T40W NX510 / NX515 SX510W / SX515W TX515W I’ll use the model number “B40W” throughout, for consistency. The first vital bit of information is that this is a double (2) waste tube printer, so you will need a Duo Waste […]

Read More

Installation: RX640 (archived)

The Epson RX640 is built in the same way as the RX560, RX580, RX585, RX590, RX595 and RX610 models from Epson so this guide will apply equally to those models as well.   Note: A more comprehensive guide for the RX560 is now available and the overall design of the printer is very similar, if […]

Read More