Note: This printer is physically, exactly the same as the following Epson printer models: C110 C120 D120 The Epson D120 follows on from the earlier C84 to D88 models and their tradition of no trapdoor or access hatch. While this does mean you have to release the top of the printer case to get […]
Category: Epson Printers
Installation guides/tips for Epson printers
Installation: Epson D92
This modification also applies to these Epson models: C79 C90, C91, C92 D78 D92 S20, S21 T10, T11 T20, T21, T23, T26, T27 The case design and general build approach for the D92 has been used in a lot of the new cheaper printers as well so this guide will be useful for a […]
Installation: RX680, RX685, RX690
This guide is equally applicable to the following models: RX680 RX685 RX690 I’ll use the model number RX685 for ease throughout. The RX685 is yet another of the “trapdoor” printer types, however it did have a small sting in the tail in terms of the trapdoor design itself so it merits its own modification […]
Installation: Epson R240, R250
Note: This printer is physically, exactly the same to the Epson Stylus R250 The R240 is one of the “trapdoor” type of printer so really this guide is just a reinforcement of other guides like the R300, R220, etc.. That said the printer design is subtly different enough that locating the waste tube is […]
Installation: Epson Stylus 900
This guide was submitted by an OctoInkjet customer as a PDF and has been retained in that format. Click the link below to download a copy. Printer Potty installation guide for the Epson Stylus 900
Installation: Epson Photo 1400, 1390, 1410
This modification covers the Epson Stylus Photo models: 1390 1400 1410 The Epson 1400 printer seems to be incredibly similar to the R2400 and R1800, in terms of case and waste ink design but with one important difference. Instead of utilising two waste tubes this printer has only one. This guide provides greater detail on […]
Installation: C84 – D88
This modification is equally applicable to to the Epson models: C84, C86, C88, D88 C64, C66, C68, D68 The C86 printer and similar models (there’s a slew of them!) do not have the trapdoor built into their designs so the instructions for fitting a waste ink tube on these printers is more complex and requires […]
Installation: BX925FWD
This is currently a place-holder for instructions. Tasks to complete: Shoot video of installation process Edit raw footage Distill out key images/frames Edit printed guide Finalise material and publish Identify similar printer models and associate to guide/kit We’re getting there… 😎
Installation instructions added for RX620, RX630, RX500
Following on from the earlier R200, R220 updated guide we’ve re-shot and re-documented the Printer Potty waste ink kit installation process for the RX620 (and related printers). The new guide is now available online. Solo+ Waste Kit | RX620 installation instructions
Installation: Epson Photo 1500W, Artisan 1430
Printer Potty installation guide for the Epson Stylus Photo 1500W and Artisan 1430 using the SoloMax waste ink kit. Installation Process An earlier version of this guide can be found here